NOWODVORSKI TRACK LIGHTING / 1-phase

From: € 21.95 excl. VAT
From: € 27.00 incl. VAT (Irish VAT 23%)

Due to the need to configure the system, please contact us to make purchases.

From: € 21.95 excl. VAT
From: € 27.00 incl. VAT (Irish VAT 23%)
From: € 21.95 excl. VAT
From: € 27.00 incl. VAT (Irish VAT 23%)
From: € 21.95 excl. VAT
From: € 27.00 incl. VAT (Irish VAT 23%)
From: € 21.95 excl. VAT
From: € 27.00 incl. VAT (Irish VAT 23%)

A modern idea for lighting in your home.
Looking at the arrangement photos, where we see that a given space is illuminated with a rail system – we say – a cool solution. But it’s not for me, it’s complicated.

Nothing could be more wrong!!!

Of course, we have to create a project how we want such lighting to look at our house. Therefore, it is worth focusing on one specific manufacturer of such lighting. Complete all the products needed to create a modern track lighting system. Just remember, let’s take it slow, step by step. If we want to do everything at once, we’ll see – it’s complicated, difficult, I’ll choose a traditional lamp model. We will try to convince you and give you some tips that will make it easier to create a project and then implement it.

Let me start with the first important question you need to ask yourself. Should it be a single-phase or three-phase installation? Well, the difference in this matter is quite significant, because it is about the number of activated light sources that are placed on the busbars. In a single-phase system, all the lamps on the track light up. We cannot turn on, for example, only one light source that is in it. However, this solution is less expensive than the other option, a three-phase system. The three-phase strip gives us a bit more possibilities. It allows you to run only selected luminaires within the same rail. If we answer that question, we’ll take the next step.

Select the appropriate rail elements:
The next stage of creating rail lighting will be the appropriate arrangement of rails on the ceiling. It is good to make a technical drawing that will help us complete the elements. If you choose Nowodvorski Lighting rails with a length of 1m or 2m under the name Profile Track, we can create track lighting in one line or use connectors to build lighting in the shape of the letter T, C, U or L according to our imagination.

At this stage, we must decide what color of rails we want to choose – white or black. Here we already have a number of elements needed to create a rail system, such as: Track profile rails, Connectors, mounting brackets, Profile power end caps, Profile end caps, Decorative luminaires. An important element are connectors, i.e. elements connecting the rails. They allow you to create layouts on the ceiling according to your needs. We distinguish those that will allow us to create straight lines (I) and broken light lines – corners (L), three-way (T) and four-way (X) connectors. It is worth noting that the rails can be mounted directly to the ceiling or hung lower on specially designed Profile Power Supply Kit hangers. In turn, the Track Recessed Profiles allow for installation in a plasterboard and hiding the busbars inside.

What is worth knowing:
Once we have a drawing that helps us choose the individual components and the shape and length of the busbars we want to place on the ceiling, we move on to the nicer things. And that’s probably the longest we’ll think about them. Namely, which lamps to choose, whether hanging or spotlights, what shape, long, short with a built-in LED module or a replaceable bulb. But there’s a nice job here. We just have to remember one very important thing. As in the case of Nowodvorski Lighting luminaires, you can choose lamps with Profiles in the name. Only they will fit this rail system.

It is worth thinking about such luminaires that allow you to set the lighting at different angles. They give more possibilities to precisely illuminate selected elements of the apartment. The maximum track length is 20 meters. Permissible busbar load 1500W. Connecting the power supply in the entire system consists in unscrewing the screw and removing the element covering the Profile Power and Cap module and connecting the current wires to the cube and grounding. Dead end End cap profiles are installed at the end of the rail track as a blanking piece. The assembly of the connector consists in inserting a screw into the rail, tightening the screw and connecting subsequent elements. Mounting the lamp to the rail is primarily plugging in the luminaire selected by us and turning the latch by 90 degrees. It electrically connects the lamp to the profile and knobs that mechanically hold the lamp in the track.

Create, change and light your home the way you want
Rail systems are very modern lighting solutions suitable for houses or commercial premises. It is very functional. It allows us to freely combine, move, regulate, emphasize and illuminate those zones that are most important to us in lighting. Hanging lamps can be combined with spotlights. And so, above the table in the dining room, we will hang hanging lamps, eg Profile Eye 9322, and in the other part of the living room, fluorescent lamps Profile Eye 9338. This type of lighting will also work very well in the kitchen. Having the ability to move the lamp on the rail, we set it to our needs at the moment during kitchen work. Thus, providing optimal conditions for this type of work. All this is possible thanks to one electrical connection, which we use in such a lighting model as comprehensive interior lighting.

The great advantage of the Nowodvorski Lighting track system is supplementing it with products that are not dedicated to this system, but can be combined in an interesting way, e.g. in the form of Eye Spot Black 6018 wall lamps. The manufacturer offers a number of products that we assemble traditionally. Their shape and color are the same as in the case of track lighting. The only difference is the mounting method. Track lighting is very popular because it has many advantages. This type of lighting is very individual and unique. It is adapted to the room in which it is located and there it is to fulfill its role in accordance with the assumptions we adopted at the beginning of our project. We do not have to worry that the rail system is rather a product dedicated to shops, shopping malls, beauty salons, where the right emphasis on interior design is the key to attracting the customer’s attention. In our apartments and houses, this unusual lighting will emphasize our style, and a wide range of lamps will allow you to create pleasant lighting that does not have to look like in commercial spaces.

Good idea for interior lighting:
To sum up, in order for the track lighting system to be installed efficiently and pleasantly in our interiors, we need a plan. How to put rails on the ceiling. Measure the room carefully, plan which zones you want to illuminate. Select all the necessary connecting elements and lighting fixtures. Then proceed to simple assembly. By choosing such a lighting system, we can have balanced lighting in a specific zone. Light sources with a built-in LED module allow for good lighting of high rooms. For such interiors, this type of luminaires is the most suitable. In home conditions, we can also use luminaires with a non-replaceable module and replaceable bulbs, which will also perfectly fulfill their roles. The track lighting system is an excellent proposition for people who like modern and functional solutions.